Skip to content

L-Panel Metal Panels in Dallas-Fort Worth

Flat metal panels for walls, fascia and soffits. The screws hide under the next panel, so you see clean lines with no screw heads.

Colors

Berridge colors to match your roof and trim.

Deliveries

Delivered straight from fabrication

Pickup

Swing by one of our locations

An L-Panel soffit, part by part

Titan makes the metal parts and cuts them to the sizes on your plan. Your installer sets the framing and furring, wires the lights, and puts each piece in place. The numbers below match the numbers in the picture. Tap the picture to see it bigger.

Your installer provides these

  1. 1Ceiling framing The wood joists that hold up the overhang.
  2. 2Furring strips Wood strips screwed across the joists to fasten the panels to.
  3. 3Light fixtures Recessed lights wired before the panels go up.

Titan makes and supplies these

  1. 4L-Panels Flat metal panels with a thin line at each joint. The screws hide under the next panel, and we cut openings for the lights.
  2. 5Fascia trim The metal band that wraps the outer edge.
  3. 6J-channel Holds the panel ends tight along the wall.
  4. 7Corner trim Covers the corner where the fascia turns.
  5. 8Drip edge A small lip along the bottom of the fascia that sheds water.

L-Panel at a glance

L-Panel is a flat Berridge metal panel that hangs straight up and down. It works on walls, fascia and soffits, inside or out. Titan bends the trim to match, in the same color.

The panel

  • 11-5/8 in. of coverage per panel
  • 24 or 22 gauge steel, or .032 aluminum
  • Smooth, stucco embossed or vented finish
  • Hidden fasteners and a flush, flat look
  • Goes over solid sheathing or open framing

Where it works best

  • Walls and screen walls
  • Fascia along the roof edge
  • Soffits and porch ceilings (vented panels let air in)
  • Inside walls and ceilings

Not sure it fits your job? Send us your plan and we will tell you.

Luxury home with a standing seam metal roof

Standing Seam Roofing

We provide custom standing seam roofing systems that deliver exceptional durability, clean modern lines, and superior weather protection. Our Quality Fabricated Architectural Metal roofing systems are built for long-lasting performance, and energy efficiency.

Decorative metal accents on a home

Metal Accents

Titan Sheet Metal fabricates custom metal accents that add style, dimension, and durability to any project. From trim and wall panels to decorative features, our accents provide a clean, modern finish.

 

Custom copper and steel metal flashing on a home

Flashing

Titan Sheet Metal fabricates custom flashing solutions designed to protect vulnerable roof and wall transitions from water intrusion. Our durable, precision-formed flashing provides reliable weather protection and a clean, professional finish.