Standing Seam Metal Roof Panels in Dallas-Fort Worth
On-Site Roll Forming
Delivery
Pickup
Panels, Not Promises
Titan Sheet Metal makes and sells standing seam panels. We do not install roofs. You choose the profile, gauge and color; we form the panels to length on Berridge and New Tech Machinery equipment, and you pick them up, have them delivered, or have us roll-form them on site.
Cut to your lengths
Every panel formed to the exact length your roof needs.
Roll-formed on site
Long runs in one piece, with no end laps.
24 and 26 gauge
Galvalume steel with PVDF paint in Berridge colors.
Pickup or delivery
From our Richland Hills shop, across Dallas-Fort Worth.
Standing Seam Profiles We Roll-Form
All three are concealed-fastener systems: no screws through the panel face, so there is nothing to back out, rust or leak. The right one depends on your roof slope, panel length and the look you want. Not sure? Send us the roof plan and we will recommend one.
Cee-Lock (snap-lock)
- Snaps together over hidden clips, no seaming tool
- 1-1/2 in. rib; widths 12, 16 and 18 in.
- Roof slope 3:12 or steeper
- Best for homes, porches and barndominiums
Tee-Lock (capped seam)
- A cap snaps over the seam for a bold line
- 1-1/2 in. seam; widths 12, 16, 18 and 20 in.
- Rated to a 1/2:12 slope
- Best for commercial, architectural and long runs
Zee-Lock (seamed)
- Seamed in the field, single or double lock
- 2 in. seam; widths 12, 16 and 18 in.
- Rated to a 1/2:12 slope when double-locked
- Best for low-slope commercial and high-wind roofs
See 3 real examples: which profile to order
Example 1: a 2,400 sq ft house in Keller with a 6:12 roof. Cee-Lock in 16" width is the usual answer. It snaps together quickly, the 1-1/2" rib reads well from the street, and the slope is far above the minimum.
Example 2: a 40x60 shop in Weatherford with a 1:12 roof. Snap-lock profiles are not rated for that slope. Order Zee-Lock and have it double-locked, or Tee-Lock with sealant in the seam. Both are rated down to 1/2:12.
Example 3: a church roof in Arlington with 54-foot rafters. Panels that long will not fit on a trailer without damage. Schedule on-site roll forming: we bring the machine and the coil to you and run each panel straight onto the roof.
Know your profile? Get a price today.
Send us the roof dimensions, pitch and the profile you want.
Gauges, Metals and Finishes
Gauge: 24 or 26
- 24 gauge: thicker and stiffer (about 0.024 in.). The standard for commercial work and premium homes, wide panels, long runs and hail-prone areas.
- 26 gauge: lighter and lower cost (about 0.019 in.). Common on homes with 12 in. Cee-Lock, porches and outbuildings.
Finish and coating
- Galvalume base on all painted steel coil, for rust resistance.
- PVDF (Kynar 500) paint: the strongest fade and chalk resistance. Berridge standard colors are PVDF.
- Bare Galvalume: a soft silver look for barns and shops.
- Custom color match: painted to your sample; longer lead time and a minimum order.
We stock the Berridge Primary, Premium and Metallic color lines. Browse them on our Colors page, or stop by the shop to see real coil samples in daylight.
See full specs
| Option | What it is | When to choose it |
|---|---|---|
| 24 gauge steel | Thicker, stiffer panel (approx. 0.024"). The standard for commercial standing seam and premium residential. | Panels over 12" wide, long runs, Tee-Lock and Zee-Lock, hail-prone areas, anywhere oil-canning would show |
| 26 gauge steel | Lighter, lower-cost panel (approx. 0.019"). Common on residential Cee-Lock, porches and outbuildings. | Budget-conscious residential and farm & ranch projects on 12" widths |
| Galvalume substrate | Steel coated with an aluminum-zinc alloy for corrosion resistance. All of our painted steel coil is Galvalume-based. | Every project; it is the baseline |
| PVDF (Kynar 500®) paint | Premium fluoropolymer finish with the strongest fade and chalk resistance. Berridge standard colors are PVDF. | Any roof you want to still look new in 20 years; required for most commercial specs |
| Bare Galvalume (unpainted) | Mill-finish panel with a soft silver look. | Barns, shops, modern farmhouse designs on a budget |
| Custom color match | Coil painted to your sample. | Matching an existing roof, HOA requirement, brand color. Longer lead time and a minimum quantity apply |
How Standing Seam Panels Are Priced in DFW
Standing seam is priced per linear foot of panel. The price depends on the gauge, the finish, the panel width (a 12 in. panel needs more seams per square than an 18 in. panel, so it uses more steel per square foot of roof), your panel lengths and the size of the order. Coil prices also change from month to month, so we price every order when you ask instead of posting numbers that go out of date.
| Panel (material only) | Gauge | Finish | Price |
|---|---|---|---|
| Cee-Lock, 16 in. | 26 ga | Standard PVDF color | Get a Price ↗ |
| Cee-Lock, 16 in. | 24 ga | Standard PVDF color | |
| Tee-Lock, 16 in. | 24 ga | With cap | |
| Zee-Lock, 16 in. | 24 ga | Standard PVDF color | |
| Bare Galvalume, 16 in. | 24 ga | Unpainted Galvalume |
Get a Price opens our quote form. Tell us the profile, gauge and finish from this table, plus your lengths or roof size, and we send back an itemized price.
A worked example: materials for a 30x40 shop roof
A 30x40 shop with a 4:12 gable roof has roughly 1,265 sq ft of roof surface. In 16 in. Cee-Lock that is about 950 linear feet of panel. A complete material package adds:
- Panel clips, closures and screws
- Ridge cap
- Eave trim
- Rake and gable trim
Send us your building size and roof pitch and we will price the full package, panels and trim together, in the gauge and color you choose.
Installed cost
If you are hiring a roofer, the installed price also depends on the roofer, the pitch and shape of the roof, and whether old roofing comes off first. Titan does not install roofs, but we work with roofers across DFW every day and can point you to crews that buy from us.
Need a real number? Send us the roof dimensions, pitch and profile and we will send back an itemized material quote, usually the same business day.
On-Site Roll Forming for Long Runs
Our New Tech Machinery roll formers are trailer-mounted, so for long or awkward roofs we bring the machine to you. Each panel comes off the machine at the exact length you call out and goes straight onto the deck.
Send your cut list
Or your roof plan, and we work out the lengths.
Get your price
We confirm profile, gauge, color and cost.
We bring the machine
The roll former and coil come to your site.
Panels to length
Straight from the machine to your crew.
When on-site forming is the right call
- Panels over 40 feet, which cannot ship on a flatbed without bending or scratching
- Roofs where you want zero end laps
- Tight sites with no room to stage long bundles
- Jobs where field measurements change
What we need from you
- A level spot for the trailer within about 100 feet of the roof edge
- Standard power, or we can run off a generator
- Your panel cut list, or someone on site to call out lengths
- A crew to carry panels from the machine to the roof
Pickup, delivery and lead times
| Option | Details |
|---|---|
| Shop pickup | 2333 Delante, Fort Worth, Texas. Monday to Friday, 7am to 5pm. Bring a trailer or flatbed long enough for your panels; we load you. |
| Delivery | Flatbed delivery across the DFW Metroplex: Fort Worth, Arlington, Dallas, Denton, Weatherford, Cleburne, Burleson, Granbury, Decatur and points between. Delivery is quoted by distance and load. |
| On-site roll forming | Scheduled by the day. Service radius covers North Texas; call for jobs farther out. |
| Lead time | Standard colors in stock: typically 3 to 5 business days from approved order. Custom or special-order colors: 2 to 4 weeks for coil. |
| Austin area | 7620 Guadalupe Street, Austin, TX 78752. Call (512) 810-9745. |
Residential, Commercial and Farm & Ranch
Homeowners and custom home builders
Standing seam is the metal roof that looks like it belongs on a house: clean vertical lines, no exposed screws, and a 40-plus-year service life that outlasts two or three shingle roofs. Cee-Lock in 24 gauge is our most common residential order. See our residential page for trim, soffit and accents that match.
Contractors and commercial builders
We supply roofers and GCs with Tee-Lock and Zee-Lock panels cut to the roof, plus coping, flashing and trim packages fabricated in the same color so the whole job matches. Volume pricing is available for repeat accounts. Details on our commercial page.
Farm & ranch and metal buildings
For barns, shops and barndominiums, standing seam is a step up from exposed-fastener R-panel: no screws to re-tighten, better hail performance, and a sharper look. Pair it with our board and batten metal siding for a complete exterior. Planning a whole building? See our Design a Building page.
Frequently Asked Questions
Still unsure which panel fits your job? Call us at (817) 682-6977 or send your roof plan.
How much does a standing seam metal roof cost in Texas?
It depends on the gauge, the panel profile and width, the finish, your panel lengths and the size of the order, and coil prices change from month to month. That is why Titan quotes every order instead of posting prices. Send us your roof dimensions, pitch and the profile you want, or call (817) 682-6977, and we will send back an itemized material quote. If you are hiring a roofer, the installed price also depends on the roofer, the pitch and shape of the roof, and whether old roofing comes off first.
Where can I buy standing seam metal roofing near Fort Worth?
Titan Sheet Metal roll-forms standing seam panels at 2333 Delante in Fort Worth. We sell to contractors and the public, and offer shop pickup, DFW delivery and on-site roll forming.
What is the difference between snap-lock and mechanically seamed standing seam?
Snap-lock panels (Cee-Lock) snap together by hand over clips and are the fastest to install, but they need at least a 3:12 roof slope. Mechanically seamed panels (Zee-Lock) are crimped together with a powered seamer, which makes a tighter, stronger seam rated for slopes as low as 1/2:12 and higher wind uplift.
Should I use 24 gauge or 26 gauge?
24 gauge is thicker and stiffer, resists oil-canning on wide panels, and is the standard for commercial work and most 16" and 18" residential panels. 26 gauge costs less and is fine for 12" residential panels, porches and outbuildings. If hail is a concern, choose 24 gauge.
Can you match the color of my existing roof or trim?
Yes. We stock the full Berridge color line and can order custom-matched coil for larger jobs. Bring a sample to the shop and we will match it to the closest stock color or quote a custom run.
Do you install the roof?
No. Titan fabricates and supplies panels and trim. We work with roofing contractors across Dallas-Fort Worth and can refer you to crews that install our panels regularly.
What is the longest panel you can make?
At the shop we form panels up to trailer length for safe transport, typically 40 feet. With on-site roll forming there is no practical limit; we have formed panels well over 60 feet straight onto the roof.
How long does a standing seam metal roof last?
A 24 gauge Galvalume panel with a PVDF (Kynar 500) finish typically carries a 35- to 40-year paint warranty and a service life of 50 years or more in the North Texas climate, compared with 15 to 25 years for asphalt shingles.
Related Services
Custom Flashing & Trim
Ridge, eave, rake, valley and gable trim fabricated in the same gauge and color as your panels, so the whole roof matches.
Board and Batten Siding
Steel board and batten siding roll-formed to length. The classic farmhouse look with none of the upkeep of wood.
Soffit
Vented and solid metal soffit panels that finish the eave, ventilate the attic and match your roof color.
Ready to price your roof?
Send us the roof dimensions, pitch and the profile you want. Most itemized quotes go out the same business day.
Call (817) 682-6977